Vibration Measurement and Allowable Values for Rotodynamic Pumps

1-Part Live Webinar

Overview

Webinar attendees will gain in-depth insights into critical measurements made on non-rotating components of rotodynamic pumps, including maximum allowable vibration values and acceptance tests. If your customers use rotodynamic pumps in clear water, this webinar will be useful for factory (vibration) acceptance tests as well as field vibration testing. This webinar is a must for anyone involved in pump acceptance testing, including individuals that witness testing. 

Learning Objectives

Upon completion, learners should be able to:

• Understand the vibration measurements that are applicable to vibration on rotodynamic pumps
• Understand the use of vibration measurement instrumentation and transducers
• Comprehend measurement locations and directions
• Understand the key differences between field vs factory acceptance testing
• Explain the factors affecting vibration
• Understand balance criteria

Registration Fees

Members, Associate Members, Standards Partners, and Training Partners of the Hydraulic Institute (HI) receive 25% discount on all available PSM training. Employees of Members, Associate Members, Standards Partner, and Training Partner organizations must log-in with their company email address in order for the discounted registration fee to apply. Industry Partners and Academic Partners receive 5% discount on all PSM training. Click here to learn more about HI membership.

Membership Question?  Call us at 973-267-9700, email us, or view the HI website for more information.

Group Registration

Group registration discounts are available for webinars as shown below. If you are interested in registering a group, please click the Group Registration Form button to download the form and email the completed form to training@pumps.org. Please note that it may take up to 3 business days to process group registrations.

GROUP REGISTRATION FORM

For Member, Associate Member, Standards Partner, and Training Partner

For Non-Member/Partner

Refunds & Cancellations

All refund requests must be made in writing to training@pumps.org. Full refunds will be issued for any live course or webinar that has been cancelled.

Webinar Instructions

1. Click the "Contents" tab and select "View Live Webinar".  After viewing the entire video, return to the Contents tab.
2. Click "Complete Quiz for Live Webinar" to answer quiz questions. You will have 10 attempts and must get at least 80% correct to proceed to the next session. After completing the quiz, return to the Contents tab.
3. Continue this process until you view and complete all the parts for this Webinar Series.
4. Click "Complete Webinar Evaluation" to provide your feedback on the webinar to PSM. Scroll down to view all feedback questions, there are questions that expand past the size of the window. 
5. Click the button “View/Print Your Certificate” in the box titled “Claim Credits & Certificate to save or print your certificate of completion. If you ever lose your certificate, you can come back to the PSM website and view it on your transcript (found in the Dashboard).

Need Assistance?

If you are experiencing any log in issues, cannot access a course, need assistance claiming credit, or have other questions or concerns, please e-mail training@pumps.org for assistance.

PDH Credits

One (1) PDH credits will be issued upon completion of this live webinar series. 

The acceptance of continuing education as it applies to fulfillment of the state licensing requirements for professional designations is at the pleasure of the individual state licensing boards. It is the responsibility of the individual participants to be knowledgeable about their state requirements.

Licensed Professional Engineers

Continuing professional development is a vital component to the engineering licensure process. Most state licensing boards require continuing professional development as a condition for licensure and renewal of the license to practice engineering. Pre-approval of training providers and courses are not required by most state licensing boards, except for the following:

Florida Board of Professional Engineers

Pump Systems Matter is a board-approved continuing education provider for the Florida Board of Professional Engineers: License # CEA361.

North Carolina Board of Examiners for Engineers and Surveyors

Pump Systems Matter is an approved continuing professional competency sponsor for the North Carolina Board of Examiners for Engineers and Surveyors: Sponsor # S-0523.

New York State Board for Engineering, Land Surveying, and Geology

Pump Systems Matter is approved as a sponsor of continuing education for professional engineers in New York State: NYS Sponsor # 241.

By participating in this webinar hosted by the Hydraulic Institute (HI) and Pump Systems Matter (PSM) you automatically agree to authorize recording of audio and or visual content presented during the live session and consent to subsequent use of the recording by HI and PSM unless otherwise stated. The audio and visual recording of the live webinar includes documents and materials exchanged or viewed during the live event; questions asked and poll answers provided by you during the live event; and the chat box transcript. Live webinar recordings are uploaded to HI’s On-Demand library for distribution.

By submitting this registration, you consent to having your name or contact information shared with the session speaker(s) and organizer(s).

If you do not consent to the audio and/or video recording of this live webinar or the sharing of your information, please do not join the session and email your concerns to training@pumps.org.