Factory Performance Testing: Hydraulic, Mechanical, and Hydrostatic: Thursday, August 22, 2024|Live Webinar

  • Registration Closed
image

Factory Performance Testing: Hydraulic, Mechanical, and Hydrostatic

Date: August 22, 2024
Time: 1:00pm EST
PDH Credits: 1.5

Overview

This webinar will provide a summary of all HI laboratory test standards for rotodynamic pumps. The presenter will cover test procedures, setups, and arrangements along with data acquisition, acceptance grades, and instrumentation. Learn the basics of factory performance testing in this webinar

Learning Objectives

• Awareness of HI Laboratory Testing Standards for rotodynamic pumps 
• Overview of hydraulic, mechanical, and hydrostatic factory test procedures (including NPSH3) 
• Understanding factory test setups and arrangements  
• Understand test acceptance grades, amplitude of fluctuations, and tolerances  
• Determine pass/fail based on test acceptance grade 
• Calculate hydrostatic test pressure  
• Overview of test instrumentation, sizing, calibration intervals, and uncertainty 

SKU: LW509C

Registration Fees

HI Member TypeFee
Member$112.50
Associate Member$112.50
Standards Partner$112.50
Training Partner$112.50
Industry Partner$142.50
Academic Partner$142.50
Non-Member/Partner$150.00

Members, Associate Members, Standards Partners, and Training Partners of the Hydraulic Institute (HI) receive 25% discount on all available PSM training. Employees of Members, Associate Members, Standards Partner, and Training Partner organizations must log-in with their company email address in order for the discounted registration fee to apply. Industry Partners and Academic Partners receive 5% discount on all PSM training. Click here to learn more about HI membership.

Membership Question?  Call us at 973-267-9700, email us, or view the HI website for more information.

Group Registration

Group registration discounts are available for webinars. If you are interested in registering a group, please click the button below to download the group registration form and upload it here. It may take up to 3 business days to process group registrations.

Download Group Registration Form

Refunds & Cancellations

All refund requests must be made in writing to training@pumps.org. Full refunds will be issued for any live course or webinar that has been cancelled.


Webinar Instructions

  1. Click the Contents tab and select "View Live Webinar".  After the live webinar is completed, return to the Contents tab.
  2. Click "Complete Quiz for Live Webinar" to answer quiz questions. You will have 10 attempts and must get at least 80% correct to proceed. After completing the quiz, return to the Contents tab.
  3. For webinar series, continue this process until you complete all the webinar sessions.
  4. Click "Complete Webinar Evaluation" to provide your feedback on the webinar to PSM. Scroll down to view all feedback questions, there are questions that expand past the size of the window. 
  5. Click the button “View/Print Your Certificate” in the box titled “Claim Credits & Certificate to save or print your certificate of completion. If you ever lose your certificate, you can come back to the PSM website and view it on your transcript (found in the Dashboard).
  6. During the Q&A portion of the training sessions questions are welcome that relate to the material presented and the instructor will do their best to address them within the context of the training provided. If time does not permit addressing questions received, we’ll make our best effort to provide an answer via email.
  7. Please note that the instructor is not able to provide consulting advice or interpretations of standards; therefore, these types of questions will not be addressed by the instructor. 

Need Assistance?

If you are experiencing any log in issues, cannot access a course, need assistance claiming credit, or have other questions or concerns, please e-mail training@pumps.org for assistance.

Alex Moser

Senior Engineer of Standards and Training

Hydraulic Institute

Alex Moser is the Senior Engineer of Standards and Training at the Hydraulic Institute with technical responsibility for standards, guidebooks, training, and technical programs as well as assisting the governmental regulations committees with technical expertise. Prior to joining the Hydraulic Institute, he held new product development and engineering management positions with a major pump manufacturer, with a focus on new pump design, system analysis, and testing. Mr. Moser obtained his B.S. Degree in Chemical Engineering at the University of Alabama.

 

PDH Credits

One (1.5) PDH credit will be issued upon completion of this live webinar series. 

The acceptance of continuing education as it applies to fulfillment of the state licensing requirements for professional designations is at the pleasure of the individual state licensing boards. It is the responsibility of the individual participants to be knowledgeable about their state requirements.

Licensed Professional Engineers

Continuing professional development is a vital component to the engineering licensure process. Most state licensing boards require continuing professional development as a condition for licensure and renewal of the license to practice engineering. Pre-approval of training providers and courses are not required by most state licensing boards, except for the following:

Florida Board of Professional Engineers

Pump Systems Matter is a board-approved continuing education provider for the Florida Board of Professional Engineers: License # CEA361.

North Carolina Board of Examiners for Engineers and Surveyors

Pump Systems Matter is an approved continuing professional competency sponsor for the North Carolina Board of Examiners for Engineers and Surveyors: Sponsor # S-0523.

New York State Board for Engineering, Land Surveying, and Geology

Pump Systems Matter is approved as a sponsor of continuing education for professional engineers in New York State: NYS Sponsor # 241.

Key:

Complete
Failed
Available
Locked
Veiw Live Webinar Session
08/22/2024 at 1:00 PM (EDT)  |  Recorded On: 08/22/2024
08/22/2024 at 1:00 PM (EDT)  |  Recorded On: 08/22/2024 Factory Performance Testing: Hydraulic, Mechanical, and Hydrostatic Hosted by Athena Amato Thursday, August 22, 2024 1:00 PM | 1 hour 30 minutes | (UTC-04:00) Eastern Time (US & Canada)
Complete Quiz for Live Webinar Session
8 Questions  |  Unlimited attempts  |  6/8 points to pass
8 Questions  |  Unlimited attempts  |  6/8 points to pass This quiz has 8 questions and requires 6 out of 8 correct answers to pass the quiz and earn your certificate of completion.
Live Webinar Survey
8 Questions
8 Questions Your feedback is important to us!
Claim Credit and Certificate
1.50 PDH credits  |  Certificate available
1.50 PDH credits  |  Certificate available Select the "View/Print Your Certificate" button to view and print your certificate of completion.
Coupons
Agree to terms to continue.
Agree to terms to continue. 10% off standards listed under Handouts.