NPSH Bundle

  • Register
    • Non-member - $159
    • Member - $119.25
    • Associate Member - $119.25
    • Academic Partner - $151.05
    • PSAP Industry Partner - $151.05
    • Pump Industry Partner - $119.25
    • Pump Industry Partner Retiree - $119.25
    • Standards Partner - Consultant - $119.25
    • Standards Partner - End User - $149.25
    • Standards Partner - End User & Basic Training - $149.25
    • Training Partner - $149.25
image

NPSH Webinar Bundle

3-Part Webinar Bundle

Overview

This is a discounted bundle of two (2) on-demand and one (1) live vibration related webinars described below. Get over 40% off the individual price when you register for this bundle.

NPSH & Total Head Calculation

This webinar will go over in detail how pump input power is calculated based on torque and speed measurements, or the measurement of electrical input power.

Guidelines for NPSH Margin in Rotodynamic Pumps: 1-Part Live Webinar

Webinar attendees will gain in-depth insights into critical measurements made on non-rotating components of rotodynamic pumps, including maximum allowable vibration values and acceptance tests. 

  • Contains 5 Component(s), Includes Credits Includes a Live Web Event on 12/13/2022 at 1:00 PM (EST)

    Date: December 13, 2022. This webinar will cover the definition, measurement, and calculation of pump total head (H) and net positive suction head available (NPSHA).

    image
    NPSH and Total Head Calculation
    1-Part Live Webinar
    Overview
    This webinar will cover the definition, measurement and calculation of pump total head (H) and net positive suction head available (NPSHA).  The instructor will review pressure (absolute, atmospheric, gauge, vapor, etc.) and how head is calculated based on pressure measurement and the liquid’s density.  All aspects of calculating total suction head (hs), total suction head absolute (hs,a), and total discharge head (hd) for the purpose of calculating total pump head (H) and NPSHA.  Five calculation examples are presented that illustrate the difference in calculations for wet-pit, closed systems, and various locations of the pressure measurement.
    Learning Objectives:
    Upon completion, learners should be able to:
    • -Understand pressure
      • Absolute
      • Atmospheric
      • Gauge
      • Vapor
      • Pump inlet
      • Pump outlet
    • -Interpret pressure profile through a pump
    • -Calculate of suction head, discharge head and total pump head for various installation and measurement examples
    • -Calculate Net Positive Suction Head Available (NPSHA) for various installation and measurement examples
     

    Registration Fees

    HI Member TypeFee
    Member$89.25
    Associate Member$89.25
    Standards Partner$89.25
    Training Partner$89.25
    Industry Partner$113.05
    Academic Partner$113.05
    Non-Member/Partner$119.00


    Members, Associate Members, Standards Partners, and Training Partners of the Hydraulic Institute (HI) receive 25% discount on all available PSM training. Employees of Members, Associate Members, Standards Partner, and Training Partner organizations must log-in with their company email address in order for the discounted registration fee to apply. Industry Partners and Academic Partners receive 5% discount on all PSM training. Click here to learn more about HI membership.

    Membership Question?  Call us at 973-267-9700, email us, or view the HI website for more information.

    Group Registration

    Group registration discounts are available for webinars. If you are interested in registering a group, please click the button below to download the group registration form and upload it here. It may take up to 3 business days to process group registrations.

    Download Group Registration Form

    For Member, Associate Member, Standards Partner, and Training Partner
    Number of Attendees1-Part Live Webinar2-Part Live Webinar3-Part Live Webinar4-Part Live Webinar
    1$89.25$119.25$149.25$179.25
    2-5$71.40$95.40$119.40$143.40
    6-10$62.75$83.75$104.75$125.75
    11+$53.55$71.55$89.55$107.55
    For Non-Member/Partner
    Number of Attendees1-Part Live Webinar2-Part Live Webinar3-Part Live Webinar4-Part Live Webinar
    1$119.00$159.00$199.00$239.00
    2-5$95.20$127.20$159.20$191.20
    6-10$83.30$111.30$139.30$167.30
    11+$71.40$95.40$119.40$143.40

    Refunds & Cancellations

    All refund requests must be made in writing and submitted to our Customer Support Center. Full refunds will be issued for any live course or webinar that has been cancelled.

    By participating in this webinar hosted by the Hydraulic Institute (HI) and Pump Systems Matter (PSM) you automatically agree to authorize recording of audio and or visual content presented during the live session and consent to subsequent use of the recording by HI and PSM unless otherwise stated. The audio and visual recording of the live webinar includes documents and materials exchanged or viewed during the live event; questions asked and poll answers provided by you during the live event; and the chat box transcript. Live webinar recordings are uploaded to HI’s On-Demand library for distribution.

    By submitting this registration, you consent to having your name or contact information shared with the session speaker(s) and organizer(s).

    If you do not consent to the audio and/or video recording of this live webinar or the sharing of your information, please do not join the session and email your concerns to our Customer Support Center.

    Course Instructions

    1. Click the "Contents" tab and select "View Live Webinar" to join the WebEx session. After the webinar is over, return to the Contents tab.
    2. Click "Complete Quiz for On-Demand Webinar" to answer quiz questions. You will have 10 attempts and must get at least 80% correct to proceed to the next session. After completing the quiz, return to the Contents tab.
    3. Click "Complete Webinar Evaluation" to provide your feedback on the webinar to PSM. Scroll down to view all feedback questions, there are questions that expand past the size of the window. 
    4. Click the button “View/Print Your Certificate” in the box titled “Claim Credits & Certificate to save or print your certificate of completion. If you ever lose your certificate, you can come back to the PSM website and view it on your transcript (found in the Dashboard).

    Need Assistance?

    If you are experiencing any log in issues, cannot access a course, need assistance claiming credit, or have other questions or concerns, please contact our Customer Support Center.

    Peter Gaydon

    Deputy Executive Director

    Hydraulic Institute

    Peter Gaydon is the Deputy Executive Director at the Hydraulic Institute. Peter has technical responsibility for all standards, guidebooks, and program guides published by the Hydraulic Institute, as well as management of government affairs committees responsible for technically reviewing regulations related to pumps. He is currently a member of the Appliance Standards Federal Rulemaking Advisory Committee (ASRAC) working group for circulator pumps. Prior to joining HI, Peter held design, development, and test engineering positions with major pump manufacturers and holds a B.S. Degree in Mechanical Engineering at the University of Alfred.

    PDH Credits

    One (1) PDH credits will be issued upon completion of this on-demand webinar series. 

    The acceptance of continuing education as it applies to fulfillment of the state licensing requirements for professional designations is at the pleasure of the individual state licensing boards. It is the responsibility of the individual participants to be knowledgeable about their state requirements.

    Licensed Professional Engineers

    Continuing professional development is a vital component to the engineering licensure process. Most state licensing boards require continuing professional development as a condition for licensure and renewal of the license to practice engineering. Pre-approval of training providers and courses are not required by most state licensing boards, except for the following:

    Florida Board of Professional Engineers

    Pump Systems Matter is a board-approved continuing education provider for the Florida Board of Professional Engineers: License # CEA361.

    North Carolina Board of Examiners for Engineers and Surveyors

    Pump Systems Matter is an approved continuing professional competency sponsor for the North Carolina Board of Examiners for Engineers and Surveyors: Sponsor # S-0523.

    New York State Board for Engineering, Land Surveying, and Geology

    Pump Systems Matter is approved as a sponsor of continuing education for professional engineers in New York State: NYS Sponsor # 241.

  • Contains 4 Component(s), Includes Credits Includes a Live Web Event on 12/14/2022 at 1:00 PM (EST)

    Date: December 14, 2022. This webinar will detail what NPSH margin is appropriate for specific applications, as well as considerations for pump design and off design operation.

    image

    Guidelines for NPSH Margin in Rotodynamic Pumps

    1-Part Live Webinar

    Learning Objectives/Summary:

    Understanding NPSH Margin in Rotodynamic pumps reviews key terms and calculations associated with net positive suction head (NPSH), considerations for what can effect the NPSH margin and recommended margins based on applications and applicable considerations.

    Learning Objectives:

    Participants will learn how to calculate NSPHA and how NPSH3 is determined from testing.
    Why an NSPH margin is required and what considerations affect the needed NPSH margin.
    Review recommended margins for specific applications and associated considerations.

    Registration Fees

    HI Member TypeFee
    Member$89.25
    Associate Member$89.25
    Standards Partner$89.25
    Training Partner$89.25
    Industry Partner$113.05
    Academic Partner$113.05
    Non-Member/Partner$119.00

    Members, Associate Members, Standards Partners, and Training Partners of the Hydraulic Institute (HI) receive 25% discount on all available PSM training. Employees of Members, Associate Members, Standards Partner, and Training Partner organizations must log-in with their company email address in order for the discounted registration fee to apply. Industry Partners and Academic Partners receive 5% discount on all PSM training. Click here to learn more about HI membership.

    Membership Question?  Call us at 973-267-9700, email us, or view the HI website for more information.

    Group Registration

    Group registration discounts are available for webinars. If you are interested in registering a group, please click the button below to download the group registration form and upload it here. It may take up to 3 business days to process group registrations.

    Download Group Registration Form

    For Member, Associate Member, Standards Partner, and Training Partner
    Number of Attendees1-Part Live Webinar2-Part Live Webinar3-Part Live Webinar4-Part Live Webinar
    1$89.25$119.25$149.25$179.25
    2-5$71.40$95.40$119.40$143.40
    6-10$62.75$83.75$104.75$125.75
    11+$53.55$71.55$89.55$107.55
    For Non-Member/Partner
    Number of Attendees1-Part Live Webinar2-Part Live Webinar3-Part Live Webinar4-Part Live Webinar
    1$119.00$159.00$199.00$239.00
    2-5$95.20$127.20$159.20$191.20
    6-10$83.30$111.30$139.30$167.30
    11+$71.40$95.40$119.40$143.40

    Refunds & Cancellations

    All refund requests must be made in writing and submitted to our Customer Support Center. Full refunds will be issued for any live course or webinar that has been cancelled.

    By participating in this webinar hosted by the Hydraulic Institute (HI) and Pump Systems Matter (PSM) you automatically agree to authorize recording of audio and or visual content presented during the live session and consent to subsequent use of the recording by HI and PSM unless otherwise stated. The audio and visual recording of the live webinar includes documents and materials exchanged or viewed during the live event; questions asked and poll answers provided by you during the live event; and the chat box transcript. Live webinar recordings are uploaded to HI’s On-Demand library for distribution.

    By submitting this registration, you consent to having your name or contact information shared with the session speaker(s) and organizer(s).

    If you do not consent to the audio and/or video recording of this live webinar or the sharing of your information, please do not join the session and email your concerns to our Customer Support Center.

    Bruce Ticknor III

    Director of Engineering, National Pump Company

    Bruce is currently the Director, Engineering at Nikkiso Cryo, Inc. in North Las Vegas. He has over 15 years' experience in the pump industry. Mr. Ticknor received his BSME from Washington State University and is a registered professional engineer in Arizona, California, Nevada and Washington. He is currently the Hydraulic Institute's vice-chair for the Nomenclature and Definitions standard and also received the Young Engineer of the Year award in 2012.