Assessing Pumping Systems for Optimization: 2-Part Webinar - February 7 & 9, 2023

  • Registration Closed

Assessing Pumping Systems for Optimization

2-Part Live Webinar Series
Dates: February 7th and 9th, 2023
Time: 1:00 p.m. (EST)
PDH Credits: 2


This two-part webinar series provides a concise understanding of the pumps system optimization processes and how to conduct successful pump system assessments, which can be implemented by focusing on life cycle cost. Examples of best practices for assessment reports and case studies of real world assessments will be covered.

Learning Objectives

Upon successful completion of this webinar, participants will be able to:

  • Identify pump system assessment steps, tasks, and knowledge requirements
  • Assemble the assessment team and planning the assessment
  • Describe the three levels of pump system assessments
  • Identify techniques and analysis tools
  • Understand optimization techniques
  • Utilize best practices in preparing the report
  • Understand case studies that focus on reliability, energy consumption, and life cycle cost 
  • Identify the important aspects of making the business case to management for optimization

Who Should Attend

Engineering consultants, engineering procurement construction engineers, pump system designers, pump system specialist, assessment engineers, process engineers, system engineers, reliability engineers, maintenance managers, and energy efficiency engineers.


Randy Riddell

Reliability Manager


Mr. Randy Riddell, CMRP, PSAP, CLS is the Reliability Manager for Essity at the Barton Mill, Alabama. He has over 30 years of industrial experience with a career focus on equipment reliability. He has a BSME from Mississippi State University. He is a Certified Maintenance & Reliability Professional from the Society of Maintenance & Reliability Professionals. He is also a Pump System Assessment Professional, PSAP, from the Hydraulic Institute.

Registration Fees

Individual registration fees for 1-part, 2-part, 3-part, and 4-part webinars are shown below per member type. The applicable registration fee will display once you login to your account.

HI Member Type 1-Part Live Webinar 2-Part Live Webinar 3-Part Live Webinar 4-Part Live Webinar
Associate Member$89.25$119.25$149.25$179.25
Standards Partner$89.25$119.25$149.25$179.25
Training Partner$89.25$119.25$149.25$179.25
Industry Partner$113.05$151.05$189.05$227.05
Academic Partner$113.05$151.05$189.05$227.05

Members, Associate Members, Standards Partners, and Training Partners of the Hydraulic Institute (HI) receive 25% discount on all available PSM training. Employees of Members, Associate Members, Standards Partner, and Training Partner organizations must log-in with their company email address in order for the discounted registration fee to apply. Industry Partners and Academic Partners receive 5% discount on all PSM training. Click here to learn more about HI membership.

Membership Question?  Call us at 973-267-9700, email us, or view the HI website for more information.

Group Registration

Group registration discounts are available for webinars. If you are interested in registering a group, please click the button below to download the group registration form and upload it here. It may take up to 3 business days to process group registrations.

Download Group Registration Form

For Member, Associate Member, Standards Partner, and Training Partner
Number of Attendees1-Part Live Webinar2-Part Live Webinar3-Part Live Webinar4-Part Live Webinar
For Non-Member/Partner
Number of Attendees1-Part Live Webinar2-Part Live Webinar3-Part Live Webinar4-Part Live Webinar

Refunds & Cancellations

All refund requests must be made in writing and submitted to our Customer Support Center. Full refunds will be issued for any live course or webinar that has been cancelled.

PDH Credits

PDH credit(s) will be issued upon successful completion of the quiz for this live webinar series. 

The acceptance of continuing education as it applies to fulfillment of the state licensing requirements for professional designations is at the pleasure of the individual state licensing boards. It is the responsibility of the individual participants to be knowledgeable about their state requirements.

Licensed Professional Engineers

Continuing professional development is a vital component to the engineering licensure process. Most state licensing boards require continuing professional development as a condition for licensure and renewal of the license to practice engineering. Pre-approval of training providers and courses are not required by most state licensing boards, except for the following:

Florida Board of Professional Engineers

Pump Systems Matter is a board-approved continuing education provider for the Florida Board of Professional Engineers: License # CEA361.

North Carolina Board of Examiners for Engineers and Surveyors

Pump Systems Matter is an approved continuing professional competency sponsor for the North Carolina Board of Examiners for Engineers and Surveyors: Sponsor # S-0523.

New York State Board for Engineering, Land Surveying, and Geology

Pump Systems Matter is approved as a sponsor of continuing education for professional engineers in New York State: NYS Sponsor # 241.


View Live Webinar Session: Part 1
02/07/2023 at 1:00 PM (EST)  |  Recorded On: 02/07/2023  |  60 minutes
02/07/2023 at 1:00 PM (EST)  |  Recorded On: 02/07/2023  |  60 minutes Open to launch WebEx and begin the webinar session. Link will be available 5 minutes prior to the start time of the webinar.
Liew Live Webinar Session: Part 2
02/09/2023 at 1:00 PM (EST)  |  Recorded On: 02/09/2023
02/09/2023 at 1:00 PM (EST)  |  Recorded On: 02/09/2023 Open to launch WebEx and begin the webinar session. Link will be available 5 minutes prior to the start time of the webinar.
Complete Quiz for Live Webinar
10 Questions  |  10 attempts  |  8/10 points to pass
10 Questions  |  10 attempts  |  8/10 points to pass This quiz has 10 questions and requires 8 out of 10 correct answers to pass.
Claim Credit and Certificate
2.00 PDH credits  |  Certificate available
2.00 PDH credits  |  Certificate available Select the "View/Print Your Certificate" button to view and print your certificate of completion.
Webinar Evaluation
11 Questions
11 Questions Your feedback is important to us! Please complete this survey to help improve future training sessions and to inform us on what new topics you want additional training on.
Coupon Code
Complete Survey to Access
Complete Survey to Access Thank you for filling out the survey. Click here to view the coupon code. This code will give you 10% off of the related publications listed in the Handouts header.