Installation & Maintenance and Operating problems & Troubleshooting - Bundle

  • Register
    • Non-member - $190
    • Member - $143
    • Associate Member - $143
    • Academic Partner - $181
    • PSAP Industry Partner - $181
    • Pump Industry Partner - $181
    • Pump Industry Partner Retiree - $143
    • Standards Partner - Consultant - $143
    • Standards Partner - End User - $143
    • Standards Partner - End User & Basic Training - $143
    • Training Partner - $143
image

Installation & Maintenance and Operating problems & Troubleshooting

2-Part Webinar Bundle

Overview

This is a discounted bundle of two (2) live webinars, bundle the products to receive an additional 20% discount. 

Basic Pump Installation and Maintenance: Industry-Recognized Methods for Long-Term Pump Reliability and Performance

This webinar provides an overview of pump types, construction and performance characteristics related to potential failure modes. It then builds on this to detail common operating issues and their causes, which supports the presentation of a troubleshooting methodology. The troubleshooting methodology presented works from failure mode to likely causes and finally measuring indicators that can confirm the cause of the failure mode. 

Date: Thursday, July 25, 2024

Common Operating issues and troubleshooting strategies in pumps

This webinar covers the basics of pump installation and maintenance, focusing on ensuring efficient, reliable, and safe operation. Participants will learn industry-recognized methods to install and maintain key components, minimizing downtime and extending the pumps' service life.

Date: Tuesday, August 20, 2024.

SKU: WB 508A

  • Contains 4 Component(s), Includes Credits Includes a Live Web Event on 07/25/2024 at 1:00 PM (EDT)

    This webinar covers the basics of pump installation and maintenance, focusing on ensuring efficient, reliable, and safe operation. Participants will learn industry-recognized methods to install and maintain key components, minimizing downtime and extending the pumps' service life.

    image

    Basic Pump Installation and Maintenance: Industry-Recognized Methods for Long-Term Pump Reliability and Performance

    Date: July 25, 2024
    Time: 1:00pm EST
    PDH Credits: 1.0

    Overview

    This webinar covers the basics of pump installation and maintenance, focusing on ensuring efficient, reliable, and safe operation. Participants will learn industry-recognized methods to install and maintain key components, minimizing downtime and extending the pumps' service life. Key installation topics include pump location, foundation, baseplate/soleplate installation, grouting, system piping, pump-driver alignment, and lift (clearance) setting for vertical pumps. The session will also discuss basic maintenance practices, including reactive, predictive, and preventive maintenance, with a focus on bearings, packing, seals, and vibration.

    Ideal for professionals, this webinar aims to enhance participants' understanding of pump installation and effective maintenance practices. The session will conclude with a concise summary of key insights, followed by a Q&A session to provide additional clarification.


    Learning Objectives

    • Learn industry-recognized methods and considerations for pump installation, including ideal pump location, foundation, baseplate/sole plate, grouting, system piping, alignment, and lift (clearance) setting for vertical pumps. 
    • Utilize maintenance practice metrics such as mean time between failure (MTBF), mean time between repair (MTBR), and availability to improve maintenance procedures, thereby minimizing downtime and extending the service life of pumps.
    • Understand the distinctions among the three basic maintenance practices: Reactive, Preventive, and Predictive. Grasp their application according to the criticality of the pump, failure patterns, and manufacturer recommendations.
    • Gain insights into essential preventive maintenance practices, including monitoring seal leakage, adjusting packing glands, checking vibration levels, inspecting lubrication systems and bearings, and performing regular inspections, all aimed at ensuring long-term pump reliability and performance.

    SKU: LW 610

    Registration Fees

    HI Member TypeFee
    Member$89.25
    Associate Member$89.25
    Standards Partner$89.25
    Training Partner$89.25
    Industry Partner$113.05
    Academic Partner$113.05
    Non-Member/Partner$119.00

    Members, Associate Members, Standards Partners, and Training Partners of the Hydraulic Institute (HI) receive 25% discount on all available PSM training. Employees of Members, Associate Members, Standards Partner, and Training Partner organizations must log-in with their company email address in order for the discounted registration fee to apply. Industry Partners and Academic Partners receive 5% discount on all PSM training. Click here to learn more about HI membership.

    Membership Question?  Call us at 973-267-9700, email us, or view the HI website for more information.

    Group Registration

    Group registration discounts are available for webinars. If you are interested in registering a group, please click the button below to download the group registration form and upload it here. It may take up to 3 business days to process group registrations.

    Download Group Registration Form

    Refunds & Cancellations

    All refund requests must be made in writing to training@pumps.org. Full refunds will be issued for any live course or webinar that has been cancelled.


    Webinar Instructions

    1. Click the Contents tab and select "View Live Webinar".  After the live webinar is completed, return to the Contents tab.
    2. Click "Complete Quiz for Live Webinar" to answer quiz questions. You will have 10 attempts and must get at least 80% correct to proceed. After completing the quiz, return to the Contents tab.
    3. For webinar series, continue this process until you complete all the webinar sessions.
    4. Click "Complete Webinar Evaluation" to provide your feedback on the webinar to PSM. Scroll down to view all feedback questions, there are questions that expand past the size of the window. 
    5. Click the button “View/Print Your Certificate” in the box titled “Claim Credits & Certificate to save or print your certificate of completion. If you ever lose your certificate, you can come back to the PSM website and view it on your transcript (found in the Dashboard).
    6. During the Q&A portion of the training sessions questions are welcome that relate to the material presented and the instructor will do their best to address them within the context of the training provided. If time does not permit addressing questions received, we’ll make our best effort to provide an answer via email.
    7. Please note that the instructor is not able to provide consulting advice or interpretations of standards; therefore, these types of questions will not be addressed by the instructor. 

    Need Assistance?

    If you are experiencing any log in issues, cannot access a course, need assistance claiming credit, or have other questions or concerns, please e-mail training@pumps.org for assistance.

    Alex Moser

    Senior Engineer of Standards and Training

    Hydraulic Institute

    Alex Moser is the Senior Engineer of Standards and Training at the Hydraulic Institute with technical responsibility for standards, guidebooks, training, and technical programs as well as assisting the governmental regulations committees with technical expertise. Prior to joining the Hydraulic Institute, he held new product development and engineering management positions with a major pump manufacturer, with a focus on new pump design, system analysis, and testing. Mr. Moser obtained his B.S. Degree in Chemical Engineering at the University of Alabama.

     

    PDH Credits

    One (1) PDH credit will be issued upon completion of this live webinar series. 

    The acceptance of continuing education as it applies to fulfillment of the state licensing requirements for professional designations is at the pleasure of the individual state licensing boards. It is the responsibility of the individual participants to be knowledgeable about their state requirements.

    Licensed Professional Engineers

    Continuing professional development is a vital component to the engineering licensure process. Most state licensing boards require continuing professional development as a condition for licensure and renewal of the license to practice engineering. Pre-approval of training providers and courses are not required by most state licensing boards, except for the following:

    Florida Board of Professional Engineers

    Pump Systems Matter is a board-approved continuing education provider for the Florida Board of Professional Engineers: License # CEA361.

    North Carolina Board of Examiners for Engineers and Surveyors

    Pump Systems Matter is an approved continuing professional competency sponsor for the North Carolina Board of Examiners for Engineers and Surveyors: Sponsor # S-0523.

    New York State Board for Engineering, Land Surveying, and Geology

    Pump Systems Matter is approved as a sponsor of continuing education for professional engineers in New York State: NYS Sponsor # 241.

  • Contains 4 Component(s), Includes Credits Includes a Live Web Event on 08/20/2024 at 1:00 PM (EDT)

    This webinar provides an overview of pump types, construction and performance characteristics related to potential failure modes. SKU: LW 210B

    image

    Common Operating Issues & Basic Troubleshooting Methods

    Date: August 20, 2024
    Time: 1:00pm EST
    PDH Credits: 1.0

    Overview

    This webinar provides an overview of pump types, construction and performance characteristics related to potential failure modes. It then builds on this to detail common operating issues and their causes, which supports the presentation of a troubleshooting methodology. The troubleshooting methodology presented works from failure mode to likely causes and finally measuring indicators that can confirm the cause of the failure mode. 

    Learning Objectives

    Attendees will leave with an understanding of:
    • Pump components and how they relate to potential failure modes.
    • Performance curves for positive displacement and rotodynamic pumps.
    • Failure modes that can occur due to the operating point of these pumps.
    • Causes of failure modes of insufficient pressure or flow, power overload, high vibration and noise, and bearing and seal failures.
    • Troubleshooting methodology that considers the failure mode, likely causes, and measurement indicators


    SKU: LW 210B

    Registration Fees

    HI Member TypeFee
    Member$89.25
    Associate Member$89.25
    Standards Partner$89.25
    Training Partner$89.25
    Industry Partner$113.05
    Academic Partner$113.05
    Non-Member/Partner$119.00

    Members, Associate Members, Standards Partners, and Training Partners of the Hydraulic Institute (HI) receive 25% discount on all available PSM training. Employees of Members, Associate Members, Standards Partner, and Training Partner organizations must log-in with their company email address in order for the discounted registration fee to apply. Industry Partners and Academic Partners receive 5% discount on all PSM training. Click here to learn more about HI membership.

    Membership Question?  Call us at 973-267-9700, email us, or view the HI website for more information.

    Group Registration

    Group registration discounts are available for webinars. If you are interested in registering a group, please click the button below to download the group registration form and upload it here. It may take up to 3 business days to process group registrations.

    Download Group Registration Form

    Refunds & Cancellations

    All refund requests must be made in writing to training@pumps.org. Full refunds will be issued for any live course or webinar that has been cancelled.


    Webinar Instructions

    1. Click the Contents tab and select "View Live Webinar".  After the live webinar is completed, return to the Contents tab.
    2. Click "Complete Quiz for Live Webinar" to answer quiz questions. You will have 10 attempts and must get at least 80% correct to proceed. After completing the quiz, return to the Contents tab.
    3. For webinar series, continue this process until you complete all the webinar sessions.
    4. Click "Complete Webinar Evaluation" to provide your feedback on the webinar to PSM. Scroll down to view all feedback questions, there are questions that expand past the size of the window. 
    5. Click the button “View/Print Your Certificate” in the box titled “Claim Credits & Certificate to save or print your certificate of completion. If you ever lose your certificate, you can come back to the PSM website and view it on your transcript (found in the Dashboard).
    6. During the Q&A portion of the training sessions questions are welcome that relate to the material presented and the instructor will do their best to address them within the context of the training provided. If time does not permit addressing questions received, we’ll make our best effort to provide an answer via email.
    7. Please note that the instructor is not able to provide consulting advice or interpretations of standards; therefore, these types of questions will not be addressed by the instructor. 

    Need Assistance?

    If you are experiencing any log in issues, cannot access a course, need assistance claiming credit, or have other questions or concerns, please e-mail training@pumps.org for assistance.

    Peter Gaydon

    Deputy Executive Director

    Hydraulic Institute

    Peter Gaydon is the Deputy Executive Director at the Hydraulic Institute. Mr. Gaydon held design, development, and test engineering positions with major pump manufacturers. He currently serves as member on several pump related standards committees for AWWA, CSA, ASME and serves as the Chair for the AWWA E103 Vertical and Horizontal Line-Shaft Pumps. With the Hydraulic Institute, Mr. Gaydon has technical responsibility for standards, guidebooks, technical regulatory affairs and certification programs. Mr. Gaydon obtained his B.S. Degree in Mechanical Engineering at the University of Alfred.

    PDH Credits

    One (1) PDH credit will be issued upon completion of this live webinar series. 

    The acceptance of continuing education as it applies to fulfillment of the state licensing requirements for professional designations is at the pleasure of the individual state licensing boards. It is the responsibility of the individual participants to be knowledgeable about their state requirements.

    Licensed Professional Engineers

    Continuing professional development is a vital component to the engineering licensure process. Most state licensing boards require continuing professional development as a condition for licensure and renewal of the license to practice engineering. Pre-approval of training providers and courses are not required by most state licensing boards, except for the following:

    Florida Board of Professional Engineers

    Pump Systems Matter is a board-approved continuing education provider for the Florida Board of Professional Engineers: License # CEA361.

    North Carolina Board of Examiners for Engineers and Surveyors

    Pump Systems Matter is an approved continuing professional competency sponsor for the North Carolina Board of Examiners for Engineers and Surveyors: Sponsor # S-0523.

    New York State Board for Engineering, Land Surveying, and Geology

    Pump Systems Matter is approved as a sponsor of continuing education for professional engineers in New York State: NYS Sponsor # 241.

Registration Fees

HI Member TypeFee
Member$143
Associate Member$143
Standards Partner$143
Training Partner$143
Industry Partner$181
Academic Partner$181
Non-Member/Partner$190

Members, Associate Members, Standards Partners, and Training Partners of the Hydraulic Institute (HI) receive 25% discount on all available PSM training. Employees of Members, Associate Members, Standards Partner, and Training Partner organizations must log-in with their company email address in order for the discounted registration fee to apply. Industry Partners and Academic Partners receive 5% discount on all PSM training. Click here to learn more about HI membership.

Membership Question?  Call us at 973-267-9700, email us, or view the HI website for more information.

Group Registration

Group registration discounts are available for webinars. If you are interested in registering a group, please click the button below to download the group registration form and upload it here. It may take up to 3 business days to process group registrations.

Download Group Registration Form

Refunds & Cancellations

All refund requests must be made in writing to training@pumps.org