Introduction to Vibration in Rotodynamic Pumps: 1-Part Live Webinar

Includes a Live Event on 07/12/2022 at 1:00 PM (EDT)


Back to Package

  • Register
    • Non-member - $129
    • Member - $96.75
    • Associate Member - $96.75
    • Academic Partner - $122.55
    • PSAP Industry Partner - $122.55
    • Pump Industry Partner - $122.55
    • Pump Industry Partner Retiree - $122.55
    • Standards Partner - Consultant - $96.75
    • Standards Partner - End User - $96.75
    • Standards Partner - End User & Basic Training - $96.75
    • Training Partner - $96.75
image

Introduction to Vibration in Rotodynamic Pumps

1-Part Live Webinar

July 12, 2022

1:00 - 2:30 p.m. (ET)

Overview

This webinar presents an introduction to vibration analysis of rotodynamic pumps. The focus is on centrifugal pumps of all types regarding their typical vibration issues such as imbalance misalignment, rubs, looseness, etc.  Troubleshooting methods and fixes are discussed with real life case histories.

Learning Objectives

Upon completion, learners should be able to understand:

  • Fundamentals of vibration theory
  • Types of vibration
  • Vibration data management, display / plots (FFT – amplitude vs. frequency)
  • Vibration measurement and instrumentation
  • Most common vibration issues: imbalance & misalignment

Registration Fees

HI Member TypeFee
Member$96.75
Associate Member$96.75
Standards Partner$96.75
Training Partner$96.75
Industry Partner$122.55
Academic Partner$122.55
Non-Member/Partner$129.00


Members, Associate Members, Standards Partners, and Training Partners of the Hydraulic Institute (HI) receive 25% discount on all available PSM training. Employees of Members, Associate Members, Standards Partner, and Training Partner organizations must log-in with their company email address in order for the discounted registration fee to apply. Industry Partners and Academic Partners receive 5% discount on all PSM training. Click here to learn more about HI membership.

Membership Question?  Call us at 973-267-9700, email us, or view the HI website for more information.

Group Registration

Group registration discounts are available for webinars. If you are interested in registering a group, please click the button below to download the group registration form and email the completed form to training@pumps.org. It may take up to 3 business days to process group registrations.

Download Group Registration Form

Refunds & Cancellations

All refund requests must be made in writing to training@pumps.org. Full refunds will be issued for any live course or webinar that has been cancelled.

Webinar Instructions

  1. Click the "Contents" tab and select "View Live Webinar".  After viewing the entire video, return to the Contents tab.
  2. Click "Complete Quiz for Live Webinar" to answer quiz questions. You will have 10 attempts and must get at least 80% correct to proceed to the next session. After completing the quiz, return to the Contents tab.
  3. Continue this process until you view and complete all the parts for this Webinar Series.
  4. Click "Complete Webinar Evaluation" to provide your feedback on the webinar to PSM. Scroll down to view all feedback questions, there are questions that expand past the size of the window. 
  5. Click the button “View/Print Your Certificate” in the box titled “Claim Credits & Certificate to save or print your certificate of completion. If you ever lose your certificate, you can come back to the PSM website and view it on your transcript (found in the Dashboard).

Need Assistance?

If you are experiencing any log in issues, cannot access a course, need assistance claiming credit, or have other questions or concerns, please e-mail training@pumps.org for assistance.

Maki M. Onari

President

Mechanical Solutions, Inc.

As President of MSI, Mr. Onari has extensive experience in resolving rotating machinery problems. He has over 25 years of turbomachinery vibration experience and holds a B.S.M.E. from Zulia University. His expertise includes field testing and associated capabilities in instrumentation, data acquisition and analysis equipment, and analysis of vibration and other dynamic machinery data. Mr. Onari is a co-author of the Pump Vibration Chapter in the McGraw-Hill Pump Handbook and is an active member on several HI committees.

Paul Boyadjis

Director of Structural Analysis

Mechanical Solutions, Inc.

  • Employed by Mechanical Solutions, Inc. since 2002
  • Vice Chair, HI Pump Vibration Committee
  • Member of HI Dynamics of Pumping Machinery Committee
  • Lecturer on Pump Vibration at the Texas A&M Pump Symposium
  • M.S. Cum Laude Lehigh University
  • 30 years experience with centrifugal pumps
  • Co-Author Pump Mechanical & Dynamic Behavior Chapter, McGraw-Hill Pump Handbook

Robert (Bob) Sayer, P.E.

Past President

Vibration Institute

  • 45 years of experience in mechanical vibration and structural dynamics
  • BSCE, Ohio University, MSIE, Cleveland State University, MSCE, Purdue University
  • Recipient, Jack Frarey Medal for Excellence in the Field of Vibration Analysis
  • Instructor, Vibration Institute “Advanced Vibration Control” training
  • Instructor, Vibration Institute “Vibration Diagnostics Using Case Studies” course
  • Author of Two Chapters, “The Simplified Handbook of Vibration Analysis, Part 2”
  • Vice-Chairman, HI/ANSI 14.5.1, Foundations for Rotodynamic Pumps

PDH Credits

1.5 PDH credits will be issued upon completion of this live webinar. 

The acceptance of continuing education as it applies to fulfillment of the state licensing requirements for professional designations is at the pleasure of the individual state licensing boards. It is the responsibility of the individual participants to be knowledgeable about their state requirements.

Licensed Professional Engineers

Continuing professional development is a vital component to the engineering licensure process. Most state licensing boards require continuing professional development as a condition for licensure and renewal of the license to practice engineering. Pre-approval of training providers and courses are not required by most state licensing boards, except for the following:

Florida Board of Professional Engineers

Pump Systems Matter is a board-approved continuing education provider for the Florida Board of Professional Engineers: License # CEA361.

North Carolina Board of Examiners for Engineers and Surveyors

Pump Systems Matter is an approved continuing professional competency sponsor for the North Carolina Board of Examiners for Engineers and Surveyors: Sponsor # S-0523.

New York State Board for Engineering, Land Surveying, and Geology

Pump Systems Matter is approved as a sponsor of continuing education for professional engineers in New York State: NYS Sponsor # 241.

By participating in this webinar hosted by the Hydraulic Institute (HI) and Pump Systems Matter (PSM) you automatically agree to authorize recording of audio and or visual content presented during the live session and consent to subsequent use of the recording by HI and PSM unless otherwise stated. The audio and visual recording of the live webinar includes documents and materials exchanged or viewed during the live event; questions asked and poll answers provided by you during the live event; and the chat box transcript. Live webinar recordings are uploaded to HI’s On-Demand library for distribution.

By submitting this registration, you consent to having your name or contact information shared with the session speaker(s) and organizer(s).

If you do not consent to the audio and/or video recording of this live webinar or the sharing of your information, please do not join the session and email your concerns to training@pumps.org.

Key:

Complete
Failed
Available
Locked
View Live Webinar Session
07/12/2022 at 1:00 PM (EDT)   |  90 minutes
07/12/2022 at 1:00 PM (EDT)   |  90 minutes Click the "View" button to launch WebEx and begin the webinar session. The link will be available 5 minutes prior to the start time of the webinar.
Complete Quiz for Live Webinar
8 Questions  |  10 attempts  |  6/8 points to pass
8 Questions  |  10 attempts  |  6/8 points to pass This quiz has 8 questions and required 6 out of 8 correct answers to pass the quiz.
Claim Credit and Certificate
Live Viewing: 1.50 PDH credits and certificate available
Live Viewing: 1.50 PDH credits and certificate available Select the "View/Print Your Certificate" button to view and print your certificate of completion.
Webinar Evaluation
11 Questions
11 Questions Your feedback is important to us! Please complete this survey to help improve future training sessions and to inform us on what new topics you want additional training on.