Vibration in Rotodynamic Pumps Bundle

  • Register
    • Non-member - $239
    • Member - $179.25
    • Associate Member - $179.25
    • Academic Partner - $227.05
    • PSAP Industry Partner - $227.05
    • Pump Industry Partner - $227.05
    • Pump Industry Partner Retiree - $227.05
    • Standards Partner - Consultant - $179.25
    • Standards Partner - End User - $179.25
    • Standards Partner - End User & Basic Training - $179.25
    • Training Partner - $179.25
image

Vibration in Rotodynamic Pumps Bundle

4-Part Webinar Bundle

Overview

This is a discounted bundle of four (4) vibration related webinars: Introduction to Vibration in Rotodynamic Pumps, Troubleshooting Rotodynamic Pump Vibration Issues, Vibration Measurement and Allowable Values for Rotodynamic Pumps, and Vibration Corrective Action Strategies for Pumping Systems. Get over 40% off the individual price if purchased separately when you register for this bundle.

Introduction to Vibration in Rotodynamic Pumps: 1-Part Live Webinar

Date: April 11, 2023  

This webinar provides basic concepts of vibration analysis and guidelines to help the diagnostic process of dynamic behavior in rotodynamic pumps and their systems.

Troubleshooting Rotodynamic Pump Vibration Issues - 1 Part Live Webinar

Date: May 16, 2023

This webinar presents a high-level step-by-step description of troubleshooting techniques to successfully address vibration issues on rotodynamic pumps.

Vibration Measurement and Allowable Values for Rotodynamic Pumps - 1 Part Live Webinar

Date: June 6, 2023

Webinar attendees will gain in-depth insights into critical measurements made on non-rotating components of rotodynamic pumps, including maximum allowable vibration values and acceptance .

Vibration Corrective Action Strategies for Pumping Systems - 1 Part Live Webinar

Date: August 1, 2023

This webinar provides an informative methodology for troubleshooting excessive vibration in newly installed and existing pumping equipment as well as to identify the source of the vibration and provide corrective action strategies to resolve those vibration issues.

  • Contains 4 Component(s), Includes Credits Includes a Live Web Event on 04/11/2023 at 1:00 PM (EDT)

    This webinar provides basic concepts of vibration analysis and guidelines to help the diagnostic process of dynamic behavior in rotodynamic pumps and their systems. SKU: LW504A

    image

    Introduction to Vibration in Rotodynamic Pumps

    Date: April 11, 2023
    Time: 1pm - 2:30pm ET
    PDH Credits: 1.5

    Overview

    This webinar presents an introduction to vibration analysis of rotodynamic pumps. The focus is on centrifugal pumps of all types regarding their typical vibration issues such as imbalance misalignment, rubs, looseness, etc.  Troubleshooting methods and fixes are discussed with real life case histories.

    Learning Objectives

    Upon successful completion of this webinar, participants will be able to understand:

    1. Fundamentals of vibration theory

    2. Types of vibration

    3. Vibration data management, display / plots (FFT – amplitude vs. frequency)

    4. Vibration measurement and instrumentation

    5. Most common vibration issues: imbalance & misalignment



    SKU: LW504A

    Robert (Bob) Sayer, P.E.

    Past President

    Vibration Institute

    • 45 years of experience in mechanical vibration and structural dynamics
    • BSCE, Ohio University, MSIE, Cleveland State University, MSCE, Purdue University
    • Recipient, Jack Frarey Medal for Excellence in the Field of Vibration Analysis
    • Instructor, Vibration Institute “Advanced Vibration Control” training
    • Instructor, Vibration Institute “Vibration Diagnostics Using Case Studies” course
    • Author of Two Chapters, “The Simplified Handbook of Vibration Analysis, Part 2”
    • Vice-Chairman, HI/ANSI 14.5.1, Foundations for Rotodynamic Pumps

    Paul Boyadjis

    Director of Structural Analysis

    Mechanical Solutions, Inc.

    • Employed by Mechanical Solutions, Inc. since 2002
    • Vice Chair, HI Pump Vibration Committee
    • Member of HI Dynamics of Pumping Machinery Committee
    • Lecturer on Pump Vibration at the Texas A&M Pump Symposium
    • M.S. Cum Laude Lehigh University
    • Over 30 years experience with centrifugal pumps
    • Co-Author Pump Mechanical & Dynamic Behavior Chapter, McGraw-Hill Pump Handbook

    Maki M. Onari

    President

    Mechanical Solutions, Inc.

    As President of MSI, Mr. Onari has extensive experience in resolving rotating machinery problems. He has over 25 years of turbomachinery vibration experience and holds a B.S.M.E. from Zulia University. His expertise includes field testing and associated capabilities in instrumentation, data acquisition and analysis equipment, and analysis of vibration and other dynamic machinery data. Mr. Onari is a co-author of the Pump Vibration Chapter in the McGraw-Hill Pump Handbook and is an active member on several HI committees.

    Registration Fees

    Individual registration fees for 1-part, 2-part, 3-part, and 4-part webinars are shown below per member type. The applicable registration fee will display once you login to your account.

    HI Member Type 1-Part Live Webinar 2-Part Live Webinar 3-Part Live Webinar 4-Part Live Webinar
    Member$89.25$119.25$149.25$179.25
    Associate Member$89.25$119.25$149.25$179.25
    Standards Partner$89.25$119.25$149.25$179.25
    Training Partner$89.25$119.25$149.25$179.25
    Industry Partner$113.05$151.05$189.05$227.05
    Academic Partner$113.05$151.05$189.05$227.05
    Non-Member/Non-Partner$119.00$159.00$199.00$239.00


    Members, Associate Members, Standards Partners, and Training Partners of the Hydraulic Institute (HI) receive 25% discount on all available PSM training. Employees of Members, Associate Members, Standards Partner, and Training Partner organizations must log-in with their company email address in order for the discounted registration fee to apply. Industry Partners and Academic Partners receive 5% discount on all PSM training. Click here to learn more about HI membership.

    Membership Question?  Call us at 973-267-9700, email us, or view the HI website for more information.

    Group Registration

    Group registration discounts are available for webinars. If you are interested in registering a group, please click the button below to download the group registration form and upload it here. It may take up to 3 business days to process group registrations.

    Download Group Registration Form

    For Member, Associate Member, Standards Partner, and Training Partner
    Number of Attendees1-Part Live Webinar2-Part Live Webinar3-Part Live Webinar4-Part Live Webinar
    1$89.25$119.25$149.25$179.25
    2-5$71.40$95.40$119.40$143.40
    6-10$62.75$83.75$104.75$125.75
    11+$53.55$71.55$89.55$107.55
    For Non-Member/Partner
    Number of Attendees1-Part Live Webinar2-Part Live Webinar3-Part Live Webinar4-Part Live Webinar
    1$119.00$159.00$199.00$239.00
    2-5$95.20$127.20$159.20$191.20
    6-10$83.30$111.30$139.30$167.30
    11+$71.40$95.40$119.40$143.40

    Refunds & Cancellations

    All refund requests must be made in writing and submitted to our Customer Support Center. Full refunds will be issued for any live course or webinar that has been cancelled.

    Webinar Platform

    Webinars are hosted on the Webex teleconferencing platform. Prior to joining the live webinar, click here for instructions on how to test your browser and install the desktop app (optional).

    Webinar Instructions

    1. To join the live webinar session, participants must login to their account and click the "Contents" tab, then select "View Live Webinar Session". After the webinar session concludes, return to the Contents tab. Note that a recording of the webinar will be available shortly after the live session.
    2. Participants must pass a quiz in order to claim PDH credits and a certificate. Click "Complete Quiz for Live Webinar" to begin the quiz. Participants will have 10 attempts and must achieve at least 80% correct to pass. After completing the quiz, return to the Contents tab.
    3. To claim PDH credits and print a certificate, click “Claim Credits & Certificate", then select the “View/Print Your Certificate” button. If you ever lose your certificate, you can come back to the PSM website and view it on your transcript (found in the Dashboard).
    4. Click "Complete Webinar Evaluation" to provide your feedback on the webinar. Scroll down to view all feedback questions, there are questions that expand past the size of the window. 

    Disclaimer

    By participating in this webinar hosted by the Hydraulic Institute (HI) and Pump Systems Matter (PSM) you automatically agree to authorize recording of audio and or visual content presented during the live session and consent to subsequent use of the recording by HI and PSM unless otherwise stated. The audio and visual recording of the live webinar includes documents and materials exchanged or viewed during the live event; questions asked and poll answers provided by you during the live event; and the chat box transcript. Live webinar recordings are uploaded to HI’s On-Demand library for distribution.

    By submitting this registration, you consent to having your name or contact information shared with the session speaker(s) and organizer(s).

    If you do not consent to the audio and/or video recording of this live webinar or the sharing of your information, please do not join the session and email your concerns to our Customer Support Center.

    Need Assistance?

    If you are experiencing any log in issues, cannot access a course, need assistance claiming credit, or have other questions or concerns, please contact our Customer Support Center.

    PDH Credits

    PDH credit(s) will be issued upon successful completion of the quiz for this live webinar. 

    The acceptance of continuing education as it applies to fulfillment of the state licensing requirements for professional designations is at the pleasure of the individual state or professional licensing boards. It is the responsibility of the individual participants to be knowledgeable about their state requirements.

    Licensed Professional Engineers

    Continuing professional development is a vital component to the engineering licensure process. Most state licensing boards require continuing professional development as a condition for licensure and renewal of the license to practice engineering. Pre-approval of training providers and courses are not required by most state licensing boards, except for the following:

    Florida Board of Professional Engineers

    Pump Systems Matter is a board-approved continuing education provider for the Florida Board of Professional Engineers: License # CEA361.

    North Carolina Board of Examiners for Engineers and Surveyors

    Pump Systems Matter is an approved continuing professional competency sponsor for the North Carolina Board of Examiners for Engineers and Surveyors: Sponsor # S-0523.

    New York State Board for Engineering, Land Surveying, and Geology

    Pump Systems Matter is approved as a sponsor of continuing education for professional engineers in New York State: NYS Sponsor # 241.

  • Contains 4 Component(s), Includes Credits Includes a Live Web Event on 05/16/2023 at 1:00 PM (EDT)

    This webinar presents a high-level step-by-step description of troubleshooting techniques to successfully address vibration issues on rotodynamic pumps. SKU: LW505A

    image

    Troubleshooting Rotodynamic Pump 

    Vibration Issues

    Date: May 16, 2023
    Time: 1pm ET
    PDH Credits: 1

    Overview

    This webinar presents a high-level step-by-step description of troubleshooting techniques to successfully address vibration issues on rotodynamic pumps.  The main focus is on centrifugal pumps of all types regarding their typical vibration issues such as imbalance, misalignment, rub, looseness, structural resonance, rotodynamic resonance, thermal loading issues, piping strain, flow-induced sub-synchronous vibration, internal recirculation, rotating stall, shaft failure, etc.

    Learning Objectives

    During this webinar, participants will learn:

    • How to attack a pump vibration problem
    • Identify the instrumentation and the test methods required to uncover the root cause of the vibration issue.
    • How to analyze the data using time wave form, frequency spectral analysis (FFT), continuous monitoring, modal analysis (bump testing), motion magnification video (MMV), and operating deflection shape (ODS).
    • Symptoms such as imbalance, misalignment, structural resonances, acoustic issues, torsional natural frequencies, cavitation, rotating stall, rubbing, and looseness are discussed.
    • Solution methods using finite element analysis (FEA) are discussed along with a detailed case study.

    SKU: LW505A

    Robert (Bob) Sayer, P.E.

    Past President

    Vibration Institute

    • 45 years of experience in mechanical vibration and structural dynamics
    • BSCE, Ohio University, MSIE, Cleveland State University, MSCE, Purdue University
    • Recipient, Jack Frarey Medal for Excellence in the Field of Vibration Analysis
    • Instructor, Vibration Institute “Advanced Vibration Control” training
    • Instructor, Vibration Institute “Vibration Diagnostics Using Case Studies” course
    • Author of Two Chapters, “The Simplified Handbook of Vibration Analysis, Part 2”
    • Vice-Chairman, HI/ANSI 14.5.1, Foundations for Rotodynamic Pumps

    Paul Boyadjis

    Director of Structural Analysis

    Mechanical Solutions, Inc.

    • Employed by Mechanical Solutions, Inc. since 2002
    • Vice Chair, HI Pump Vibration Committee
    • Member of HI Dynamics of Pumping Machinery Committee
    • Lecturer on Pump Vibration at the Texas A&M Pump Symposium
    • M.S. Cum Laude Lehigh University
    • Over 30 years experience with centrifugal pumps
    • Co-Author Pump Mechanical & Dynamic Behavior Chapter, McGraw-Hill Pump Handbook

    Jason Coppola

    Project Engineer III

    Mechanical Solutions, Inc.

    • Employed by Mechanical Solutions, Inc. since 2010
    • Extensive experience with FEA software such as Creo Parametric or Creo Elements/Pro for solid modeling or CAD, CAM, CAE, and associative 3D modeling application, ANSYS Multiphysics, and ANSYS Workbench
    • Extensive experience with advanced field testing,  troubleshooting, and data acquisition methods, including the use of accelerometers, strain gauges, microphones, and proximity probes
    • Active Committee Member of HI Vibration Committee since 2020
    • BS Mechanical Engineering at The College of New Jersey, Cum Laude
    • 12 years of experience with various types of water and wastewater pumps

    Registration Fees

    Individual registration fees for 1-part, 2-part, 3-part, and 4-part webinars are shown below per member type. The applicable registration fee will display once you login to your account.

    HI Member Type 1-Part Live Webinar 2-Part Live Webinar 3-Part Live Webinar 4-Part Live Webinar
    Member$89.25$119.25$149.25$179.25
    Associate Member$89.25$119.25$149.25$179.25
    Standards Partner$89.25$119.25$149.25$179.25
    Training Partner$89.25$119.25$149.25$179.25
    Industry Partner$113.05$151.05$189.05$227.05
    Academic Partner$113.05$151.05$189.05$227.05
    Non-Member/Non-Partner$119.00$159.00$199.00$239.00


    Members, Associate Members, Standards Partners, and Training Partners of the Hydraulic Institute (HI) receive 25% discount on all available PSM training. Employees of Members, Associate Members, Standards Partner, and Training Partner organizations must log-in with their company email address in order for the discounted registration fee to apply. Industry Partners and Academic Partners receive 5% discount on all PSM training. Click here to learn more about HI membership.

    Membership Question?  Call us at 973-267-9700, email us, or view the HI website for more information.

    Group Registration

    Group registration discounts are available for webinars. If you are interested in registering a group, please click the button below to download the group registration form and upload it here. It may take up to 3 business days to process group registrations.

    Download Group Registration Form

    For Member, Associate Member, Standards Partner, and Training Partner
    Number of Attendees1-Part Live Webinar2-Part Live Webinar3-Part Live Webinar4-Part Live Webinar
    1$89.25$119.25$149.25$179.25
    2-5$71.40$95.40$119.40$143.40
    6-10$62.75$83.75$104.75$125.75
    11+$53.55$71.55$89.55$107.55
    For Non-Member/Partner
    Number of Attendees1-Part Live Webinar2-Part Live Webinar3-Part Live Webinar4-Part Live Webinar
    1$119.00$159.00$199.00$239.00
    2-5$95.20$127.20$159.20$191.20
    6-10$83.30$111.30$139.30$167.30
    11+$71.40$95.40$119.40$143.40

    Refunds & Cancellations

    All refund requests must be made in writing and submitted to our Customer Support Center. Full refunds will be issued for any live course or webinar that has been cancelled.

    Webinar Platform

    Webinars are hosted on the Webex teleconferencing platform. Prior to joining the live webinar, click here for instructions on how to test your browser and install the desktop app (optional).

    Webinar Instructions

    1. To join the live webinar session, participants must login to their account and click the "Contents" tab, then select "View Live Webinar Session". After the webinar session concludes, return to the Contents tab. Note that a recording of the webinar will be available shortly after the live session.
    2. Participants must pass a quiz in order to claim PDH credits and a certificate. Click "Complete Quiz for Live Webinar" to begin the quiz. Participants will have 10 attempts and must achieve at least 80% correct to pass. After completing the quiz, return to the Contents tab.
    3. To claim PDH credits and print a certificate, click “Claim Credits & Certificate", then select the “View/Print Your Certificate” button. If you ever lose your certificate, you can come back to the PSM website and view it on your transcript (found in the Dashboard).
    4. Click "Complete Webinar Evaluation" to provide your feedback on the webinar. Scroll down to view all feedback questions, there are questions that expand past the size of the window. 

    Disclaimer

    By participating in this webinar hosted by the Hydraulic Institute (HI) and Pump Systems Matter (PSM) you automatically agree to authorize recording of audio and or visual content presented during the live session and consent to subsequent use of the recording by HI and PSM unless otherwise stated. The audio and visual recording of the live webinar includes documents and materials exchanged or viewed during the live event; questions asked and poll answers provided by you during the live event; and the chat box transcript. Live webinar recordings are uploaded to HI’s On-Demand library for distribution.

    By submitting this registration, you consent to having your name or contact information shared with the session speaker(s) and organizer(s).

    If you do not consent to the audio and/or video recording of this live webinar or the sharing of your information, please do not join the session and email your concerns to our Customer Support Center.

    Need Assistance?

    If you are experiencing any log in issues, cannot access a course, need assistance claiming credit, or have other questions or concerns, please contact our Customer Support Center.

    PDH Credits

    PDH credit(s) will be issued upon successful completion of the quiz for this live webinar. 

    The acceptance of continuing education as it applies to fulfillment of the state licensing requirements for professional designations is at the pleasure of the individual state or professional licensing boards. It is the responsibility of the individual participants to be knowledgeable about their state requirements.

    Licensed Professional Engineers

    Continuing professional development is a vital component to the engineering licensure process. Most state licensing boards require continuing professional development as a condition for licensure and renewal of the license to practice engineering. Pre-approval of training providers and courses are not required by most state licensing boards, except for the following:

    Florida Board of Professional Engineers

    Pump Systems Matter is a board-approved continuing education provider for the Florida Board of Professional Engineers: License # CEA361.

    North Carolina Board of Examiners for Engineers and Surveyors

    Pump Systems Matter is an approved continuing professional competency sponsor for the North Carolina Board of Examiners for Engineers and Surveyors: Sponsor # S-0523.

    New York State Board for Engineering, Land Surveying, and Geology

    Pump Systems Matter is approved as a sponsor of continuing education for professional engineers in New York State: NYS Sponsor # 241.

  • Contains 4 Component(s), Includes Credits Includes a Live Web Event on 06/06/2023 at 1:00 PM (EDT)

    Webinar attendees will gain in-depth insights into critical measurements made on non-rotating components of rotodynamic pumps, including maximum allowable vibration values and acceptance tests. SKU: LW506A

    image

    Vibration Measurement and Allowable Values for Rotodynamic Pumps

    Date: June 6th, 2023
    Time: 1pm ET
    PDH Credits: 1

    Overview

    Webinar attendees will gain in-depth insights into critical measurements made on non-rotating components of rotodynamic pumps, including maximum allowable vibration values and acceptance tests. If your customers use rotodynamic pumps in clear water, this webinar will be useful for factory (vibration) acceptance tests as well as field vibration testing. This webinar is a must for anyone involved in pump acceptance testing, including individuals that witness testing. 

    Learning Objectives

    Upon completion, learners should be able to:

    • Understand the vibration measurements that are applicable to vibration on rotodynamic pumps
    • Understand the use of vibration measurement instrumentation and transducers
    • Comprehend measurement locations and directions
    • Understand the key differences between field vs factory acceptance testing
    • Explain the factors affecting vibration
    • Understand balance criteria

    SKU: LW506A

    Paul Boyadjis

    Director of Structural Analysis

    Mechanical Solutions, Inc.

    • Employed by Mechanical Solutions, Inc. since 2002
    • Vice Chair, HI Pump Vibration Committee
    • Member of HI Dynamics of Pumping Machinery Committee
    • Lecturer on Pump Vibration at the Texas A&M Pump Symposium
    • M.S. Cum Laude Lehigh University
    • Over 30 years experience with centrifugal pumps
    • Co-Author Pump Mechanical & Dynamic Behavior Chapter, McGraw-Hill Pump Handbook

    Robert (Bob) Sayer, P.E.

    Past President

    Vibration Institute

    • 45 years of experience in mechanical vibration and structural dynamics
    • BSCE, Ohio University, MSIE, Cleveland State University, MSCE, Purdue University
    • Recipient, Jack Frarey Medal for Excellence in the Field of Vibration Analysis
    • Instructor, Vibration Institute “Advanced Vibration Control” training
    • Instructor, Vibration Institute “Vibration Diagnostics Using Case Studies” course
    • Author of Two Chapters, “The Simplified Handbook of Vibration Analysis, Part 2”
    • Vice-Chairman, HI/ANSI 14.5.1, Foundations for Rotodynamic Pumps

    Jason Coppola

    Project Engineer III

    Mechanical Solutions, Inc.

    • Employed by Mechanical Solutions, Inc. since 2010
    • Extensive experience with FEA software such as Creo Parametric or Creo Elements/Pro for solid modeling or CAD, CAM, CAE, and associative 3D modeling application, ANSYS Multiphysics, and ANSYS Workbench
    • Extensive experience with advanced field testing,  troubleshooting, and data acquisition methods, including the use of accelerometers, strain gauges, microphones, and proximity probes
    • Active Committee Member of HI Vibration Committee since 2020
    • BS Mechanical Engineering at The College of New Jersey, Cum Laude
    • 12 years of experience with various types of water and wastewater pumps

    Registration Fees

    Individual registration fees for 1-part, 2-part, 3-part, and 4-part webinars are shown below per member type. The applicable registration fee will display once you login to your account.

    HI Member Type 1-Part Live Webinar 2-Part Live Webinar 3-Part Live Webinar 4-Part Live Webinar
    Member$89.25$119.25$149.25$179.25
    Associate Member$89.25$119.25$149.25$179.25
    Standards Partner$89.25$119.25$149.25$179.25
    Training Partner$89.25$119.25$149.25$179.25
    Industry Partner$113.05$151.05$189.05$227.05
    Academic Partner$113.05$151.05$189.05$227.05
    Non-Member/Non-Partner$119.00$159.00$199.00$239.00


    Members, Associate Members, Standards Partners, and Training Partners of the Hydraulic Institute (HI) receive 25% discount on all available PSM training. Employees of Members, Associate Members, Standards Partner, and Training Partner organizations must log-in with their company email address in order for the discounted registration fee to apply. Industry Partners and Academic Partners receive 5% discount on all PSM training. Click here to learn more about HI membership.

    Membership Question?  Call us at 973-267-9700, email us, or view the HI website for more information.

    Group Registration

    Group registration discounts are available for webinars. If you are interested in registering a group, please click the button below to download the group registration form and upload it here. It may take up to 3 business days to process group registrations.

    Download Group Registration Form

    For Member, Associate Member, Standards Partner, and Training Partner
    Number of Attendees1-Part Live Webinar2-Part Live Webinar3-Part Live Webinar4-Part Live Webinar
    1$89.25$119.25$149.25$179.25
    2-5$71.40$95.40$119.40$143.40
    6-10$62.75$83.75$104.75$125.75
    11+$53.55$71.55$89.55$107.55
    For Non-Member/Partner
    Number of Attendees1-Part Live Webinar2-Part Live Webinar3-Part Live Webinar4-Part Live Webinar
    1$119.00$159.00$199.00$239.00
    2-5$95.20$127.20$159.20$191.20
    6-10$83.30$111.30$139.30$167.30
    11+$71.40$95.40$119.40$143.40

    Refunds & Cancellations

    All refund requests must be made in writing and submitted to our Customer Support Center. Full refunds will be issued for any live course or webinar that has been cancelled.

    Webinar Platform

    Webinars are hosted on the Webex teleconferencing platform. Prior to joining the live webinar, click here for instructions on how to test your browser and install the desktop app (optional).

    Webinar Instructions

    1. To join the live webinar session, participants must login to their account and click the "Contents" tab, then select "View Live Webinar Session". After the webinar session concludes, return to the Contents tab. Note that a recording of the webinar will be available shortly after the live session.
    2. Participants must pass a quiz in order to claim PDH credits and a certificate. Click "Complete Quiz for Live Webinar" to begin the quiz. Participants will have 10 attempts and must achieve at least 80% correct to pass. After completing the quiz, return to the Contents tab.
    3. To claim PDH credits and print a certificate, click “Claim Credits & Certificate", then select the “View/Print Your Certificate” button. If you ever lose your certificate, you can come back to the PSM website and view it on your transcript (found in the Dashboard).
    4. Click "Complete Webinar Evaluation" to provide your feedback on the webinar. Scroll down to view all feedback questions, there are questions that expand past the size of the window. 

    Disclaimer

    By participating in this webinar hosted by the Hydraulic Institute (HI) and Pump Systems Matter (PSM) you automatically agree to authorize recording of audio and or visual content presented during the live session and consent to subsequent use of the recording by HI and PSM unless otherwise stated. The audio and visual recording of the live webinar includes documents and materials exchanged or viewed during the live event; questions asked and poll answers provided by you during the live event; and the chat box transcript. Live webinar recordings are uploaded to HI’s On-Demand library for distribution.

    By submitting this registration, you consent to having your name or contact information shared with the session speaker(s) and organizer(s).

    If you do not consent to the audio and/or video recording of this live webinar or the sharing of your information, please do not join the session and email your concerns to our Customer Support Center.

    Need Assistance?

    If you are experiencing any log in issues, cannot access a course, need assistance claiming credit, or have other questions or concerns, please contact our Customer Support Center.

    PDH Credits

    PDH credit(s) will be issued upon successful completion of the quiz for this live webinar. 

    The acceptance of continuing education as it applies to fulfillment of the state licensing requirements for professional designations is at the pleasure of the individual state or professional licensing boards. It is the responsibility of the individual participants to be knowledgeable about their state requirements.

    Licensed Professional Engineers

    Continuing professional development is a vital component to the engineering licensure process. Most state licensing boards require continuing professional development as a condition for licensure and renewal of the license to practice engineering. Pre-approval of training providers and courses are not required by most state licensing boards, except for the following:

    Florida Board of Professional Engineers

    Pump Systems Matter is a board-approved continuing education provider for the Florida Board of Professional Engineers: License # CEA361.

    North Carolina Board of Examiners for Engineers and Surveyors

    Pump Systems Matter is an approved continuing professional competency sponsor for the North Carolina Board of Examiners for Engineers and Surveyors: Sponsor # S-0523.

    New York State Board for Engineering, Land Surveying, and Geology

    Pump Systems Matter is approved as a sponsor of continuing education for professional engineers in New York State: NYS Sponsor # 241.

  • Contains 4 Component(s), Includes Credits Includes a Live Web Event on 08/01/2023 at 1:00 PM (EDT)

    This webinar provides an informative methodology for troubleshooting excessive vibration in newly installed and existing pumping equipment as well as to identify the source of the vibration and provide corrective action strategies to resolve those vibration issues. SKU: LW507A

    image

    Vibration Corrective Action Strategies for Pumping Systems

    Date: July 25th, 2023
    Time: 1pm ET
    PDH Credits: 1

    Overview

    This webinar provides an informative methodology for troubleshooting excessive vibration in newly installed and existing pumping equipment as well as to identify the source of the vibration and provide corrective action strategies to resolve those vibration issues. This webinar includes case studies

    Learning Objectives

    Upon successful completion of this webinar, participants will be able to:

    1. Identify the instrumentation and test methods to uncover root cause of the vibration issue.
    2. Identify diagnostic testing techniques used to analyze field data.
    3. Analyze the various symptoms of vibration and identify corrective action strategies.

    SKU: LW507A

    Robert (Bob) Sayer, P.E.

    Past President

    Vibration Institute

    • 45 years of experience in mechanical vibration and structural dynamics
    • BSCE, Ohio University, MSIE, Cleveland State University, MSCE, Purdue University
    • Recipient, Jack Frarey Medal for Excellence in the Field of Vibration Analysis
    • Instructor, Vibration Institute “Advanced Vibration Control” training
    • Instructor, Vibration Institute “Vibration Diagnostics Using Case Studies” course
    • Author of Two Chapters, “The Simplified Handbook of Vibration Analysis, Part 2”
    • Vice-Chairman, HI/ANSI 14.5.1, Foundations for Rotodynamic Pumps

    Maki M. Onari

    President

    Mechanical Solutions, Inc.

    As President of MSI, Mr. Onari has extensive experience in resolving rotating machinery problems. He has over 25 years of turbomachinery vibration experience and holds a B.S.M.E. from Zulia University. His expertise includes field testing and associated capabilities in instrumentation, data acquisition and analysis equipment, and analysis of vibration and other dynamic machinery data. Mr. Onari is a co-author of the Pump Vibration Chapter in the McGraw-Hill Pump Handbook and is an active member on several HI committees.

    Paul Boyadjis

    Director of Structural Analysis

    Mechanical Solutions, Inc.

    • Employed by Mechanical Solutions, Inc. since 2002
    • Vice Chair, HI Pump Vibration Committee
    • Member of HI Dynamics of Pumping Machinery Committee
    • Lecturer on Pump Vibration at the Texas A&M Pump Symposium
    • M.S. Cum Laude Lehigh University
    • Over 30 years experience with centrifugal pumps
    • Co-Author Pump Mechanical & Dynamic Behavior Chapter, McGraw-Hill Pump Handbook

    Registration Fees

    Individual registration fees for 1-part, 2-part, 3-part, and 4-part webinars are shown below per member type. The applicable registration fee will display once you login to your account.

    HI Member Type 1-Part Live Webinar 2-Part Live Webinar 3-Part Live Webinar 4-Part Live Webinar
    Member$89.25$119.25$149.25$179.25
    Associate Member$89.25$119.25$149.25$179.25
    Standards Partner$89.25$119.25$149.25$179.25
    Training Partner$89.25$119.25$149.25$179.25
    Industry Partner$113.05$151.05$189.05$227.05
    Academic Partner$113.05$151.05$189.05$227.05
    Non-Member/Non-Partner$119.00$159.00$199.00$239.00


    Members, Associate Members, Standards Partners, and Training Partners of the Hydraulic Institute (HI) receive 25% discount on all available PSM training. Employees of Members, Associate Members, Standards Partner, and Training Partner organizations must log-in with their company email address in order for the discounted registration fee to apply. Industry Partners and Academic Partners receive 5% discount on all PSM training. Click here to learn more about HI membership.

    Membership Question?  Call us at 973-267-9700, email us, or view the HI website for more information.

    Group Registration

    Group registration discounts are available for webinars. If you are interested in registering a group, please click the button below to download the group registration form and upload it here. It may take up to 3 business days to process group registrations.

    Download Group Registration Form

    For Member, Associate Member, Standards Partner, and Training Partner
    Number of Attendees1-Part Live Webinar2-Part Live Webinar3-Part Live Webinar4-Part Live Webinar
    1$89.25$119.25$149.25$179.25
    2-5$71.40$95.40$119.40$143.40
    6-10$62.75$83.75$104.75$125.75
    11+$53.55$71.55$89.55$107.55
    For Non-Member/Partner
    Number of Attendees1-Part Live Webinar2-Part Live Webinar3-Part Live Webinar4-Part Live Webinar
    1$119.00$159.00$199.00$239.00
    2-5$95.20$127.20$159.20$191.20
    6-10$83.30$111.30$139.30$167.30
    11+$71.40$95.40$119.40$143.40

    Refunds & Cancellations

    All refund requests must be made in writing and submitted to our Customer Support Center. Full refunds will be issued for any live course or webinar that has been cancelled.

    Webinar Platform

    Webinars are hosted on the Webex teleconferencing platform. Prior to joining the live webinar, click here for instructions on how to test your browser and install the desktop app (optional).

    Webinar Instructions

    1. To join the live webinar session, participants must login to their account and click the "Contents" tab, then select "View Live Webinar Session". After the webinar session concludes, return to the Contents tab. Note that a recording of the webinar will be available shortly after the live session.
    2. Participants must pass a quiz in order to claim PDH credits and a certificate. Click "Complete Quiz for Live Webinar" to begin the quiz. Participants will have 10 attempts and must achieve at least 80% correct to pass. After completing the quiz, return to the Contents tab.
    3. To claim PDH credits and print a certificate, click “Claim Credits & Certificate", then select the “View/Print Your Certificate” button. If you ever lose your certificate, you can come back to the PSM website and view it on your transcript (found in the Dashboard).
    4. Click "Complete Webinar Evaluation" to provide your feedback on the webinar. Scroll down to view all feedback questions, there are questions that expand past the size of the window. 

    Disclaimer

    By participating in this webinar hosted by the Hydraulic Institute (HI) and Pump Systems Matter (PSM) you automatically agree to authorize recording of audio and or visual content presented during the live session and consent to subsequent use of the recording by HI and PSM unless otherwise stated. The audio and visual recording of the live webinar includes documents and materials exchanged or viewed during the live event; questions asked and poll answers provided by you during the live event; and the chat box transcript. Live webinar recordings are uploaded to HI’s On-Demand library for distribution.

    By submitting this registration, you consent to having your name or contact information shared with the session speaker(s) and organizer(s).

    If you do not consent to the audio and/or video recording of this live webinar or the sharing of your information, please do not join the session and email your concerns to our Customer Support Center.

    Need Assistance?

    If you are experiencing any log in issues, cannot access a course, need assistance claiming credit, or have other questions or concerns, please contact our Customer Support Center.

    PDH Credits

    PDH credit(s) will be issued upon successful completion of the quiz for this live webinar. 

    The acceptance of continuing education as it applies to fulfillment of the state licensing requirements for professional designations is at the pleasure of the individual state or professional licensing boards. It is the responsibility of the individual participants to be knowledgeable about their state requirements.

    Licensed Professional Engineers

    Continuing professional development is a vital component to the engineering licensure process. Most state licensing boards require continuing professional development as a condition for licensure and renewal of the license to practice engineering. Pre-approval of training providers and courses are not required by most state licensing boards, except for the following:

    Florida Board of Professional Engineers

    Pump Systems Matter is a board-approved continuing education provider for the Florida Board of Professional Engineers: License # CEA361.

    North Carolina Board of Examiners for Engineers and Surveyors

    Pump Systems Matter is an approved continuing professional competency sponsor for the North Carolina Board of Examiners for Engineers and Surveyors: Sponsor # S-0523.

    New York State Board for Engineering, Land Surveying, and Geology

    Pump Systems Matter is approved as a sponsor of continuing education for professional engineers in New York State: NYS Sponsor # 241.