Introductory Pump, System and Energy Training for Students and Educators

  • Register
    • Member - Free!
    • Associate Member - Free!
    • Academic Partner - Free!
    • Standards Partner - Consultant - Free!
    • Standards Partner - End User - Free!
    • Standards Partner - End User & Basic Training - Free!
    • Training Partner - Free!

Training Program Overview:

This training bundle is designed for educators and students to introduce them to important pump and system concepts. Students can earn a certificate of completion and educators can incorporate into their teaching to provide students specific industry knowledge from the authority on pumps and systems. Contact [email protected] if you want to incorporate this training into your program.

The training curriculum includes:

  • An Introduction to Pumps & Systems Training (Six learning modules with quizzes and final exam)
  • System Curve, Pump Curve and Affinity Rule Learning Activity
  • Pump System Energy Calculation Learning Activity

All training is On-Demand, and includes video instruction, knowledge resources, and quizzes and learning activities to reinforce the learning objectives.

Learning Level: Introductory and Basic

Introductory level training provides awareness and an overview of the topic. The content is informative and aims to familiarize participants with key concepts, terminology and resources.

Basic level training provides foundational understanding of a topic and develops basic competencies.

Audience:

Anyone new to the topic that is looking for entry-level instruction and learning opportunity. Great for new engineers, operators and maintenance, sales or students looking to broaden their knowledge.

Educators are encouraged to review these materials and incorporate in their teaching to provide students specific industry knowledge. 

Learning Objectives:

  • Pump types and construction
  • Electric motors and construction
  • Fluid properties
  • Basics of a pump head and flow curve
  • System curve considerations
  • Pump selection considerations
  • How affinity rules are used to modify the pump curve
  • The system operating point and how it can change
  • Calculation of power consumption based on operating conditions
  • Electrical input power, pump input power and pump output power required by the system
  • Calculation of energy consumption (kWh)
  • How to read and use the HI Energy Rating Label
  • How to use the Pump Savings Calculator
  • How to determine the energy consumption for constant speed and variable speed pumps supplying the same flow rate

Course Materials Included:

  • Self-study resources
  • On-Demand instructional videos
  • Quizzes and exam
  • Learning assignments
  • Answer explanations

SKU: B-SR-001

  • Contains 16 Component(s), Includes Credits

    This introductory training provides foundational knowledge of pump systems through 6 (six) short modules. Participants will learn about pump types, basic construction and operation, pump drivers, system requirements, and pump selection. It is ideal for individuals new to the pump industry or those interested in pursuing a technical career in the field. SKU: C-1024-OD-2026

    image

    Foundational Pump & System Training
    On-Demand
    Professional Development Hours: 1.5

    Overview:

    This training serves as the starting point for introductory level pump system knowledge. Broken into six (6) short (10 – 15-minute) modules, it is thoughtfully designed so that those new to the industry can learn about pump types, their basic construction and operation, pump drivers, system requirements and pump selection. 

    Learning Path:

    Learning Level – Introductory:

    Introductory training is for individuals who are new to the subject or need a refresher. It provides awareness and an overview of the topic. The content is informative and aims to familiarize participants with key concepts, terminology and resources.

    Audience:

    • Entry-level employees (all roles).
    • Employees that are new to pumps.
    • Students looking to learn about pumps.
    SKU: C-1024-OD-2026

    Learning Objectives:

    Participants will be able to:

    • General pump classification, function, and major components
    • Types of pump drivers, AC induction motor function and major components
    • Classification of fluids and primary effects on pumping
    • Basic system arrangements and introduction of the pump system curve
    • Basic pump performance curves and what controls the system operating point
    • Major pump hydraulic selection considerations
    • Registration

    Training Outline:

    Module 1: Introduction to Pumps

    • Types of rotodynamic pumps and operation
    • Types of positive displacement pumps operation
    • Pump components
    • Pump markets

    Module 2: Introduction to Pumps Drivers

    • Electric motors and operating characteristics
    • Components of a motor
    • Other types of drivers

    Module 3: Introduction to Fluid Properties

    • Properties of fluids and liquids
    • How properties change with temperature
    • Effect of properties on pumping

    Module 4: Introduction to system Hydraulics

    • Classification of systems and components
    • Definition of the system curve and operating point
    • How systems are controlled

    Module 5: Introduction to Basic Operational Theory

    • Operating principles of rotodynamic pumps
    • Operating principles of positive displacement pumps
    • Basic performance curves and the operating point

    Module 6: Introduction to Pump Selection and Data

    • Hydraulic selection considerations (Flow, Head, Pressure, etc.)
    • Effect of fluid properties


    Registration Fees:

    Individual registration fees for the six (6) training modules are shown below per member type. The applicable registration fee will display once you login to your account.

    Hydraulic Institute Member and Partner Types Pricing
    Member$0.00
    Associate Member$0.00
    Standards Partner$0.00
    Training Partner$0.00
    Industry Partner$99.00
    Academic Partner$99.00
    Non-Member/Non-Partner$199.00


    Members, Associate Members, Standards Partners, and Training Partners of the Hydraulic Institute (HI) receive 25% discount on all available PSM training. Employees of Members, Associate Members, Standards Partner, and Training Partner organizations must log-in with their company email address in order for the discounted registration fee to apply. Industry Partners and Academic Partners receive 5% discount on all PSM training.

    Membership Question?  Call us at 973-267-9700, email us, or view the HI website for more information about membership benefits.

    Refunds:

    All refund requests must be made in writing to [email protected].

    • Slide Decks for Each Domain Training
    • On-Demand Training and Quizzes for each Module

    Professional Development Hours (PDH):

    Upon the successful completion of this on-demand content, you will receive a Certificate of Completion for the number of credit hours noted on the "Overview" tab.

    Note: 1.0 PDHs is equivalent to 0.10 CEUs or 1.0 Contact Hours

    Licensed Professional Engineers:

    Continuing professional development is a vital component of the engineering licensure process. Most state licensing boards require continuing professional development as a condition for licensure and renewal of the license to practice engineering. The acceptance of continuing education as it applies to fulfillment of the state licensing requirements for professional designations is at the pleasure of the individual state licensing boards. It is the responsibility of the individual participants to be knowledgeable about their state requirements. Pre-approval of training providers and courses is not required by most state licensing boards, except for the following:

    Florida Board of Professional Engineers

    Pump Systems Matter is a board-approved continuing education provider for the Florida Board of Professional Engineers: License # CEA361.

    New York State Board for Engineering, Land Surveying, and Geology

    Pump Systems Matter is approved as a sponsor of continuing education for professional engineers in New York State: NYS Sponsor # 241.

    The Hydraulic Institute (HI) has developed three certifications: Pump System Certification – Level 1 (PSC Level 1), Pump System Certification – Level 2 (PSC Level 2), and the Pump System Assessment Professional (PSAP). Each certification level includes 16 standard knowledge domains but the knowledge topics within each domain have logical progression from understand and apply (Level 1), to interpret and analyze (Level 2), to evaluate and solve (PSAP).


    Pump Systems Matter (PSM) has created an aligned training catalog. As outlined in the Pump System Training and Certification Alignment Pyramid below, each training product is assigned to a Learning Level that corresponds with the certification level. This creates a cohesive and structured learning pathway.

    image

    Learn more about Pump System Certification Level 1

    HI Data Tool: The HI Data Tool is a comprehensive guide for pump users, pump manufacturers and engineers in need of references for pump principles, calculations, and unit conversions. 

    Pump Industry Fundamentals Body of Knowledge (BOK): The Pump Industry Fundamentals Body of Knowledge covers general pump system fundamental knowledge requirements (learning outcomes) that should be common across job functions and industries.

    World Without Pumps: This fun and relatable recruitment piece brings light to the hidden world of pumps and the positive impact they have on our everyday lives and society.

    Pump Pros Know: What do pump pros know and why do they know it? This series of articles highlight the brilliance of those who work with pumps

    HI Blog: Provides news and knowledge articles regarding the pump and fluid handling industry.

    PSM Newsletter: Provides news and knowledge articles focusing on energy efficiency and improving the performance of pumping systems.

  • Contains 5 Component(s)

    This learning activity includes on-demand training, self study resources and learning activity to reinforce the use of the pump affinity rules and the pump system operating point.

    Training Program Overview:

    This learning activity includes on-demand video instruction, self-study resources and learning activity to reinforce the use of the pump affinity rules and the pump system operating point.

    Learning Level: Introductory

    Introductory level training provides awareness and an overview of the topic. The content is informative and aims to familiarize participants with key concepts, terminology and resources.

    Audience:

    Anyone new to the topic that is looking for entry-level instruction and learning opportunity. Great for new engineers, operators and maintenance, sales or students looking to broaden their knowledge.

    Learning Objectives:

    • Basics of a pump head and flow curve
    • System curve considerations
    • How affinity rules are used to modify the pump curve
    • The system operating point and how it can change

    Course Materials Included:

    • On-Demand Video
    • Learning assignment
    • Quizzes
    • Answer explanation

    SKU: OD-LA-1

    Training Outline - Pump and System Curve, Affinity Rules and Operation Point Learning Activity

    1. System Curve, Pump Curve, Affinity Rules and the Operating Point Instructional Video
    2. HI Data Tool Knowledge Resources
    3. Learning Assignment - Pump Curves and Applying Affinity Rules
      1. Explained Answers
    4. Operating Point Quiz
      1. Explained Answers
  • Contains 6 Component(s)

    This learning activity utilizes self-study learning, video instruction and learning activities to teach you how to calculate power and energy consumption for a pump system.

    Training Program Overview:

    This learning activity includes a self-study resources, a pump savings calculator, an instructional video on how to use the calculator and learning activities to reinforce the determination of pump system energy consumption for constant and variable speed operation.

    Learning Level: Basic

    Basic level training provides foundational understanding of a topic and develops basic competencies.

    Audience:

    Anyone new to the topic that has an introductory level of knowledge of pumps and pump systems. Great for new engineers, operators and maintenance, sales or students looking to broaden their knowledge.

    Learning Objectives:

    • Calculation of power consumption based on operating conditions
    • Electrical input power, pump input power and pump output power required by the system
    • Calculation of energy consumption (kWh)
    • How to read and use the HI Energy Rating Label
    • How to use the Pump Savings Calculator
    • How to determine the energy consumption for constant speed and variable speed pumps supplying the same flow rate

    Course Materials Included:

    • Self-study resources
    • On-Demand instructional video
    • Learning assignments
    • Answer explanations

    SKU: OD-LA-2

    Training Outline - Pump System Power and Energy Learning Activity

    1. Pump System Power and Energy Consumption Knowledge Resource
    2. Pump System Power and Energy Learning Assignment
      1. Explained Answers
    3. Pump Savings Calculator Instructional Video
    4. Pump Savings Calculation Learning Assignment
      1. Explained Answers

Introductory Pump and System Training

  • Module 1: Introduction to Pumps
  • Module 2: Introduction to Pumps Drivers
  • Module 3: Introduction to Fluid Properties
  • Module 4: Introduction to system Hydraulics
  • Module 5: Introduction to Basic Operational Theory
  • Module 6: Introduction to Pump Selection and Data
  • Final Exam

Training Outline - Pump and System Curve, Affinity Rules and Operation Point Learning Activity

  • System Curve, Pump Curve, Affinity Rules and the Operating Point Instructional Video
  • HI Data Tool Knowledge Resources
  • Learning Assignment - Pump Curves and Applying Affinity Rules
    • Explained Answers
  • Operating Point Quiz
    • Explained Answers

Training Outline - Pump System Power and Energy Learning Activity

  • Pump System Power and Energy Consumption Knowledge Resource
  • Pump System Power and Energy Learning Assignment
    • Explained Answers
  • Pump Savings Calculator Instructional Video
  • Pump Savings Calculation Learning Assignment
    • Explained Answers